Mold growth in homes is the hot topic in the home building industry today. Headlines tout the danger of exposure to mold in our homes and at work. A member of the fungi family, mold comes in thousands of varieties and exists in every indoor and outdoor environment. It is a natural and necessary part of the ecosystem in which we live. While many types of mold have positive benefits, there are several strains that can lead to health problems if allowed to flourish.
Who is at risk?
Exposure to certain types of mold can cause health problems. The sensitivity of individuals and the exposure amount varies so widely that there has been no “safe” threshold defined by authorities. According to the Center for Disease Control (CDC), most people experience no reaction to “normal” mold exposure.
Some individuals are very sensitive to mold exposure, much like some people are affected by hay fever. Children, senior citizens and people with weakened immune systems may be more vulnerable to mold exposure. Although “toxic mold” is the phrase most often seen in headlines, the Environmental Protection Agency and the CDC state there is very little current scientific evidence connecting mold exposure and extreme illness, considering the low levels of exposure in most homes.
If mold has been around forever, why are we seeing so many problems now?
Building practices and materials have evolved at a rapid pace in the US during the past century. Today, the predominance of organic building materials such as paper faced drywall, wood framing and plywood sheathing provide a food source for mold growth. Also, increased energy costs and a limited supply of fuel have forced us to construct more energy efficient buildings. Past construction practices allowed moisture from cooking, bathing and other occupant activities to readily escape, along with conditioned air. According to the National Association of Home Builders (NAHB), we build homes that are 50% more energy efficient than 30 years ago. Sealing the building envelope against air loss is critical in achieving this performance. The problem arises when moisture and humidity levels are uncontrolled.
What does moisture have to do with it? Mold typically found in homes is a living organism and requires three favorable conditions in which to grow:
|Temperature Range||Between 40 and 100 degrees Fahrenheit|
|Food Source||Organic material (wood, dust, paper, etc.)|
|Moisture||Water, or water vapor (high humidity, plumbing or roof leaks, etc.)|
People need the same conditions to survive. Of the three components required for mold growth, moisture is the only one we can control while maintaining comfortable living conditions.
Where does this moisture come from?
Leaks and flooding – Most major mold problems are attributed to large quantities of water. Plumbing, roofing and walls can develop leaks. This is often due to deferred maintenance, storm damage or improper material installation. Undetected, a small leak can lead to major problems.
Condensation – Everyone is familiar with condensation of water vapor on a cold beverage during a warm summer day. The same thing can happen on a window during a winter day, or on a cold water pipe or air-conditioned ductwork in a hot, humid climate. Left unchecked, this condensation can accumulate and create ideal mold growing conditions.
Air leaks – As winds blow against a house, air can leak through gaps in sheathing, under sill plates, around doors, windows, and electrical outlets. If there is a large difference between indoor and outdoor temperatures, water vapor can condense in wall cavities as it passes through insulation and cools down to the dew point. Once liquid water collects in the cavity, mold can begin to grow.
Regardless of the source, excess water should be cleaned up as soon as possible and the affected materials should be dried out. If you suspect you have serious mold growth in your home, seek advice from your insurance carrier.
How do I prevent mold growth in my home?
The food sources for mold are plentiful; wood construction materials and furniture, paper in drywall and wallpaper, organic fibers in fabrics, carpet backings and dust. If these organic food sources are exposed to high levels of moisture in our homes, mold can grow.
The Nose Knows – Musty odors are a sign of mold growth in a building. Look for visible signs of mold or moisture and eliminate the moisture source.
Humidity Levels – Current recommendations from the NAHB suggest keeping maximum relative humidity levels at below 40% during the heating season and below 60% during the cooling season.
Proper Ventilation. Bath fans, kitchen fans and clothes dryers should be vented to the outside of the building envelope. Energy recovery ventilation is recommended in tightly constructed homes where there are less than .35 fresh air changes per hour.
Seal of Approval– Sealing outlets, sill plates, and through-wall penetrations including doors and windows can minimize uncontrolled air infiltration. Insulating pipes and ductwork in humid spaces can minimize condensation in these areas.
Inspection and Maintenance – Regular inspection and cleaning of the condensation drain line on a central air conditioning unit is recommended. Inspect the roof, windows and siding after storms to identify missing shingles, damaged flashing and visible water leaks.
Are Concrete Homes affected by Mold?
The concrete, foam and steel in a concrete wall system are not a food source for mold growth unlike wood studs, joists and wall sheathing. However, organic materials such as floor decking, paper faced drywall and carpet are used inside concrete homes. These products can support mold growth and should be treated accordingly. Regardless of the building system, there is no substitute for good construction practices, regular inspections and preventative maintenance to prevent mold from getting a foothold in your home.
What’s the bottom line?
Mold is here to stay but we can do something about it. Homeowners have a responsibility to regularly inspect and maintain the components of their home to ensure that water is not accumulating in the building. Maintain reasonable humidity levels and fresh air exchange rates. Evidence of mold or moisture (visibly or by smell) should be addressed immediately to locate and eliminate the moisture source. Affected materials should be thoroughly dried or removed and replaced.
Looking For More Mold Information?
The following resources are available to learn more about mold prevention and mitigation:
NAHB “Mold in Residential Buildings” at https://www.achrnews.com/articles/91622-moisture-and-mold-on-the-home-front
EPA “Homes and Mold” at http://www.epa.gov/iaq/molds/moldresources.html